Government of India

Ministry of Commerce

Directorate General of Foreign Trade

(P.C-IV Division)

PolicyCircular No. 3 /(RE-2000)/2000-01/

Dated 7.4.2000

 

ALL LICENSING AUTHORITY

ALL COMMISSIONERS OF CUSTOMS

 

Subject : Consideration of application under paragraph 6.8 of Handbook (Vol.1) without reference to Headquarters EPCG Committee.

Attention is invited to Paragraph 6.8 of the Handbook (Vol.1) wherein it has been stated that in such cases where nexus norms have already been communicated by Headquarters in any case or the same is already established on the basis of the EPCG licences issued in the past by the Port Offices, such applications may not be forwarded to Headquarters EPCG Committee.

In addition to the items covered by the Lists given in Annexure-I, II and III of the Policy Circular No. 52 (RE-99)/99-2000 dated 18.2.2000, for Hotels, Textile Sector and Garments Sector respectively, it has been decided that in respect of the items given in the Annexure to this Circular, EPCG licences upto Rs. 50 crores may be issued by RLAs concerned without referring such applications to Headquarters EPCG Committee.

 

This issues with the approval of DGFT.

 

 

(A.K. SRIVASTAVA)

Dy. Director General of Foreign Trade

 

(F.No. 01/94/180/Handbook/AM-01/Policy-IV)

 

ANNEXURE TO POLICY CIRCULAR NO.3(RE-2000)/1997-2002 Dt.7.4.2000

 

A. CHEMICALS & ALLIED PRODUCTS:

(a) Drugs and Pharmaceuticals:-

(1)

Various types of vaccines

  1. Lyophiliser (Freeze Dryer)
  2. Washer
  3. Elisa Plate Reader
  4. Elisa Plate Washer
  5. Carbon Dioxide Incubatore
  6. Fermentor System
  7. Robotic Cell Culture System
  8. Cell Disruption System
  9. Cross Flow Micro Filtration system
  10. Chromatography
  11. Ultracentrifugation system
  12. Vibromixer
  13. Dosing Pumps
  14. Vaccum Pump
  15. Hapa Printing and Labelling Machine
  16. Mobile Storage System
  17. Automatic Sealing Machine
  18. Inverted Microscope

(2)

Bulk Drugs, Intermediates and Pharmaceutical formulations

  1. Quad Bridge
  2. Pressure Transducer
  3. Force Displacement transducer
  4. Haemosys Pressure Bridge Amplifier
  5. Constant Pressure Lagendroff
  6. CO 101 Cardistar Cardiac Output Computer
  7. Bio Imaging Analysis System with imaging plates
  8. EPC-9 Patch Clamp amplifier and software and chart recorder
  9. Harward Single syringe pump
  10. Homeothermic Blanket
  11. Carl Zeiss Inverted Microscope Axiovert 25C with phase and Varel contract
  12. Controlled Rate Cryofreezer
  13. DNA Sequencer (with Filmless Autoradiography)
  14. Animal Cell Culture Fermentor
  15. Microbial Cell Culture Fermentor

(b) Glass and Glass Products:-

(1)

Glass Beads, Necklaces, Rosaries Tasbees, Glass Bead, Fashion Jewellery

  1. Bead Grinding Machine
  2. Furnance
  3. Flate Wheel Grinders
  4. Tumblers for Polishing
  5. Table Cutting machines

(c) Paper and Paper products:-

(1)

Paper and paper board including coated paper

  1. Stock Preparation and Approach Flow System
  2. On Machine Coater
  3. Colour Kitechen
  4. Paper Rewinder and Rereeler
  5. Off Machine Paper Coater
  6. Paper Calendering System
  7. Paper Machine Hood
  8. Paper Laminating Machine
  9. Paper Sheet Cutters
  10. Paper Ream Wrapping Machine
  11. Paper Rolls Handing and Wrapping System
  12. DCS & QCS and Web Inspection system
  13. AC variable speed drives for paper machine

(d) Petro-chemical Products

Sl.No.

Export Product

Capital Goods which can be imported

(1)

Linear Alkyl Benzene

  1. Temperature Controlled Reactor
  2. LHCS
  3. Sodium Pump
  4. Degassing Drum BTM Pump
  5. Vent Pump
  6. Plugging Meter
  7. Nuclear Level Instruments
  8. Flow Meters
  9. Vessels
  10. Variable Frequency Drives
  11. Heat Tracer Panels
  12. Sodium Heater Burner
  13. Firing Gas Burner
  14. Coil for Sodium Heater
  15. 30" Gate Valves
  16. Cable for Instruments

(2)

Petrochemicals, Polymers, Fibre Intermediates, Polyesters, Textile Items

  1. Cracked Gas Compressor
  2. Ethylene Refrigerant Centrifugal Compressor
  3. Propylene Refrigerant Centrifugal System
  4. Fuel Gas Compressor System
  5. Quench Oil Circulation Pumps
  6. Quench Water Circulation pumps
  7. Diluation Steam generator feed pumps
  8. Demethaniser Reflux Pumps
  9. De-ethaniser Reflux Pumps
  10. Ethylene Rectifier Bottom Pumps
  11. Ethylene Rectifier Reflux Pumps
  12. C3 Hydrogenation feed pumps
  13. Propylene Transfer pumps
  14. Propylene Tower Reflux / Product Pumps
  15. HP Boiler feed water pumps
  16. Methane Product Heater
  17. Control Valves
  18. Viscometer
  19. Vibration cubicles
  20. Analyser houses
  21. Level Transmitter Displacer
  22. Nucleonic Level Transmitter

(e) Others:-

(1)

Calcined Alumina

  1. Equipment & Accessories for Apron Feeder - Detailed list
  2. Equipment, Accessories for Tooth Crusher - Detailed list
  3. Calcination-Detailed list.
  4. Equipment & Spares for evaporation.

(2)

Chlorine, Caustic Soda

  1. Gas Turbine Engine
  2. Naptha
  3. Heat Recovery Steam Generator
  4. D.M. Water Plant System Skid

(3)

Cement

  1. Gas Turbine Generator
  2. Steam Turbine Generator
  3. DCS System

(4)

Purified Terepathalic Acid

  1. Stripper Still Pot
  2. Residue Evaporator
  3. Residue Crystallizer
  4. Start-up Heater
  5. Condenser
  6. Cooler
  7. Reboiler
  8. Heater
  9. HBr Trank
  10. HAC Settler
  11. Agitator
  12. Belt Fitter
  13. CTA Dryer
  14. Vibrating Sieve
  15. Reslurry Drum
  16. Decanter

(5)

Soda Ash

  1. Steam Tube Calciner
  2. Calciner Feeder
  3. Calciner Mixer
  4. Bicarbonate Feeder
  5. High-Efficiency Cyclones
  6. Return Soda Ash Star Feeder
  7. Dust Discharge Screw Conveyor
  8. Dust Star Feeder
  9. Discharge Star Feeder
  10. Calcined Chain Conveyor
  11. Ash Recycle Conveyor
  12. Gas Scrubber

 

 

 

B. Electronics Sector:

Sl.No.

Export Product

Capital Goods which can be imported

(1)

Compact Disc (Audio & Video

  1. MCL 50 CD Manufacturing System
  2. PC-Drying System
  3. Netstal Discjet Moulding Machine

(2)

Compact Disc for reproduction of sound and images, CG Rom

  1. Screw Chillers
  2. Mieleir
  3. Superwasher
  4. Stamper
  5. Basic Insert
  6. Buffer Container
  7. Microfilter Spare
  8. Filter Spare
  9. Airtech Air Shower

(3)

Colour Picture Tubnes

  1. Holder frame assy. Machine
  2. Mask Frame Welding machine
  3. Charcterstic test set machine
  4. 21" CPT assy.machine
  5. 21" gun assy.machine
  6. Furnace
  7. Yam Machine

(4)

Quartz Analong Watches and Jewellery watches

  1. Digital Micro Vickers Hardness Tester
  2. Automatic Movement Assembly Line
  3. Centrifugal Polishing Machine
  4. Test Appliance
  5. CNC Engraving Machine
  6. Vibration Testing Machine

 

 

C. Engineering Sector:

(a) Automobile:-

(1)

Passenger Car, Passenger Car in CKD/SKD, Engine, Transmission and Automobile Components.

  1. Engine and Transmission Shop
  2. Press Shop
  3. Body Shop
  4. Assembly Shop
  5. Quality Control Shop

(2)

Commercial Vehicles, Jeep type vehicles and passenger cars.

  1. Heilbronn
  2. Walter
  3. Sumitomo
  4. Sampuensili
  5. Sicmat
  6. SNK
  7. Lamb
  8. ELB
  9. WACO
  10. Tschudin
  11. Oerlikon

(3)

Two Wheelers, Three Wheelers, parts accessories etc.

  1. CNC gear hobbing machine
  2. Multi-purpose, chamber furnace
  3. Auto clamping machine
  4. CNC Angular wheelhead grinding machine
  5. CNC Cam Grinding machine
  6. Motokubo NC Cam Milling machine
  7. High Speed Horizontal machining centre
  8. NTC make, Vertical machining centre

(4)

Gears & Gear Boxes, Synchronisers for off road and on road vehicles

  1. Resharpening Machine
  2. Shaving Cutter
  3. Drilling Machine
  4. Turning Machine
  5. Broaching Machine
  6. Milling Machine
  7. Shaping Machine
  8. Hobbing Machine
  9. Grinding Machine
  10. Clipping Machine
  11. Gear Tooth Rounding Machine
  12. Universal measuring Machine
  13. Sawing Machine

(5)

Crankshafts/ Front Axlebeams (Forged & Machined)

  1. Hot Forging Press
  2. Material Handling Equipment
  3. Forging Roll
  4. Quick Tool Change System
  5. Water Spraying Mechanical Appliance
  6. Combustion System
  7. Material Handling System

 

 

(b) Industrial Machinery:-

Sl.No.

Export Product

Capital Goods which can be imported

(1)

Fuel Injection Equipment & Components thereof

  1. Emission Analysis system
  2. Mini Dilution System
  3. Charge amplifiers
  4. Thermal Air-mass flow meter
  5. Infinium Oscilloscopes
  6. Gun Drill Grinding Machine
  7. Sedi Graph
  8. Lab Car MLBA2
  9. Hand held digital storage
  10. Digital Real Time
  11. Vibration time system
  12. Servohydraulic system
  13. Durability Test Systems/table top

(2)

Anti Explosion Special alloy Based filler Material

  1. Mesh making machine
  2. Mesh balls making machine Spherematic-10
  3. Mesh balls making machine Spherematic-35
  4. Detailed list

(3)

Various Engine Parts

  1. Gravity Casting M/c
  2. Melting Furnace
  3. Holding Furnace
  4. Ladle
  5. Burning Furnace
  6. Core Making M/c
  7. Core Knockout M/c
  8. Shot Blasting M/c
  9. Degassing Unit
  10. Impregnation
  11. Moulds
  12. Milling M/c
  13. Washing M/c
  14. Cutting M/c
  15. Machining Centre Verticle
  16. Multi Drilling M/c
  17. Gun Drilling M/c
  18. Inserting M/c
  19. Leak Tester
  20. Caulking M/c
  21. Assembly line
  22. Sub-facility
  23. Inspecing M/c
  24. Index Unit
  25. Spectrometre
  26. D Layout M/c
  27. C/F Guage
  28. Gauges, Micrometer, Calipers
  29. Rotary Index Table
  30. Lathe
  31. Milling M/c
  32. Drilling M/c
  33. Radial Drilling M/c
  34. Grinding M/c
  35. Tool Grinder

(4)

Electric Motors and Geared Motors

  1. Couth make Marking Machine
  2. Pressure Die Casting Dies
  3. Winder
  4. Inserter
  5. Endform Press
  6. Drift Press
  7. Wedge Maker
  8. CNC Universal Cylindrical Grinding Machine Studer
  9. Twine Spindle CNC turning lathe
  10. Die Casting Machine

(c) Bicycle and Bicycle Parts:-

(1)

Bicycle & its parts

  1. Continuous Medium Strip Mills for HR Steel Strips
  2. Special Purpose Grinding Machine
  3. Spectro Mobile Spectrometer with spares

(d) Iron and Steel Items:-

(1)

Cold Rolled Steel strips (CR)/galvanised strips

  1. Hi Cold Reversing Mill
  2. Bearings for Rolling Mill
  3. Eddy current Tester
  4. D.G. Sets

(2)

Steel Forgings

  1. Spline Milling Machine
  2. Shaver Sharpening Machine
  3. Centreless Grinder
  4. Verson 500 Ton Press
  5. CNC Internal Grinder
  6. Shapper Cutter Sharpener
  7. Height Guage
  8. Gear Shaving Machines
  9. Spline Hobbing Machine
  10. Thread Grinding Machine
  11. Smeral Press
  12. Bliss Press
  13. Gear Tooth Deburing & Chamfering Machine
  14. Micro Hardness Tester
  15. Broach Sharpening Machine
  16. Helix Lead & Profile Tester
  17. Radial Drilling Machine
  18. Horizontal Milling Machine
  19. 25 Ton Broaching Machine
  20. Polishing Machine
  21. CNC Gear Grinding Machine
  22. Profile Projector
  23. Turret Lathe
  24. Bevel Gear Cutter Sharpening Machine
  25. Surface Roughness Tester
  26. Pillar Drilling Machine
  27. Bevel Bear Lapping Machine
  28. Twin Spindle Machine
  29. Tool & Cutter Grinder
  30. Surface Grinding Machine
  31. High Speed Gear Shapping Machine
  32. Gear Hobbing Machine
  33. Spectrometer
  34. Spline Grinding Machine
  35. Hydraulic Press
  36. Gear shapping Machine
  37. Angular Wheel Head Grinder
  38. Gleason Lapping Machine
  39. Rotary Indexing SPM Machine
  40. Gear Honning Machine
  41. 300 Ton Cold Forging Hydraulic Press
  42. 750 Ton Cold Forging Hydraulic Press
  43. Cleveland Machanical press
  44. 120 Ton Cold Forging Hydraulic Press
  45. 350 Ton Cold Forging Hydraulic Press
  46. 275 Ton Cold Forging Hydraulic Press
  47. Twin Spindle

(3)

CR, CRGP, CRGC, SHEETS, STRIPS, COILS, Steel Pipes, Steel tubes, galvanised tubes, galvanised pipes

  1. Roll Grinder
  2. Compressor
  3. Water Chilling Machine
  4. Pump for AC Plant
  5. Welder
  6. Steel Cutting Equipment
  7. Testing machine

(4)

Iron or Steel, Engine, Motors, Aluminum, Transmission Shaft, Cranks, Gears and Gearings, Screws, Pulleys, Tarque converters

  1. Automatic Moulding Machine

(5)

CR or GP Coils/ Sheets

  1. Hi Reversing Cold Rolling cum skin pass mill
  2. Tapered Roller Bearings
  3. 5310 PC Computerised Americium
  4. F-52806 3 Curie Americium Source Assembly
  5. Timken Tapered Roller Bearings
  6. HI Skin Pass Mill
  7. Tension Leveller
  8. Auxiliary Lines
  9. Roll Grinding Machine

(6)

Hot Rolled Coils/Sheets/ Plates

  1. Air Separation Plant
  2. Tunnel Furnace
  3. Gantry Cranes and Magnets.

 

 

(e) Others:-

(1)

Table Ware of Stainless Steel

  1. Rolling Mill
  2. Knuckle Joint Press
  3. Heat Treatable Tool
  4. Grinding Machine
  5. Serrater Machine
  6. Grinding Machine Type AS1/2-H
  7. Machine RJC
  8. Detailed list
  9. Detailed list
  10. Cutlery Role
  11. Automatic Round Table
  12. Welding Machine
  13. Automatic Wet-Grinding Machine
  14. Automatic Tig-Welding System
  15. Knucke Joint Press Type 1000
  16. Ostling
  17. Cleaning & Polishing Accessories

 

 

(2)

Fabricated Structural products of iron and steel, Highmssts Conical Poles, Lattice Towers

  1. Galvanising Plant
  2. Equipment for material handling
  3. Precision Hydraulic Press
  4. Automatic Whelding Machine
  5. Vaccum lifting unit
  6. CNC profile cutting machine
  7. CNC punching and sharing system

(3)

Copper Cathode LME Grade A, Copper Anodes/ Cathodes, Blister Copper Slag, Copper Scrap & Waste, Zinc Baring Residues, Lead Bearing Residues, Anode Sline, Nickel Sulphate, Blast Furnance Slag

  1. Cathode Plate
  2. DC Bus Bar
  3. Automatic Refinery Crane

(4)

Pressure Die Cast Components of Aluminium

1. ARL Metals Analyzer

(5)

Atomized Products: Grains- Metal Alloys, Brazing and Soldering Alloys, Paste, Powder, Sputtering Material, Fabrication: Gold Bars, Medallions, pendants, coins, slabs

  1. Gas Atomiser Unit
  2. Pour Box and Fixture
  3. Drying Oven
  4. Melting Furnace
  5. Modular Vault System
  6. Building Alarm
  7. Metal Detector
  8. Closed Circuit Television System
  9. Atomic Absorption Spectometer
  10. Spark Spectrometer
  11. X-Ray Spectrometer
  12. Fire Assay Furnace
  13. Cupellation Furnace
  14. Mettler Balances
  15. Belt Surfacer
  16. Instrument Tables
  17. Melting Lift Up Furnance
  18. Rolling Mill
  19. Blanking Press
  20. Coining Press
  21. Annealing Furnace
  22. Casting Furnace
  23. Graining Furnace
  24. Casting Equipments

 

D. Food Products

Sl. No.

Export Product

Capital goods which can be imported

(1)

Dairy Products

  1. Pasta Cutting Machine
  2. Planetary Mixing, Stirring & Whisking Machine
  3. Vacuum Chamber Machine-C-500
  4. Conveyorised Vaccum Chamber Machine
  5. Vertical Form Fill & Seal Wrapper
  6. Electronic Weigher
  7. Cube Cutting Machine
  8. Sam Slicing Systems
  9. HTST Sterilisation process & packing line

(2)

Frozen Sea Foods, Vegetables and Foods

  1. Industrial Freezers
  2. Rack Station
  3. Rich Trucks for Freezers
  4. Truck Refrezeration Unit
  5. Thermoking

(3)

Frozen Meat & Meat Products

  1. Mechanised Abbatoir Line
  2. Continuous Processing Plant
  3. Refrigeration System

 

 

E. Leather Products

Sl.No.

Export Product

Capital Goods which can be imported

(1)

Leather Manufacture goods

  1. Hydraulic Clicking Machine (Bottom)
  2. Lining trimming Machine
  3. Lining Stamping Machine
  4. Thermo Cementing & Folding Machine
  5. Taping & Sxeam Rubbing Machine
  6. Automatic Punching & Eyeletting
  7. Hydraulic Splitting Machine
  8. Plating & Ironing Machine
  9. Flat Bed Single Needle Industrial Sewing Machine
  10. Flat Bed Double Needle Industrial Sewing Machine
  11. Post Bed Single Needle Industrial Sewing Machine
  12. Post Bed Double Needle Industrial Sewing Machine
  13. Zig Zag Flat Bed Industrial Sewing Machine
  14. Cylinder Bed Industrial Sewing Machine

(2)

Leather Shoe Uppers/Shoes

  1. Mocassin Preforming Machine
  2. Insole Attaching Machine
  3. Back Part Moulding Machine
  4. Roughing Machine for Uppers/Soles/ Insoles
  5. Pilling Over and Cement Lasting Machine
  6. Humidifier for uppers
  7. Tack Heel Seat Lasting Machine
  8. Pounding/Beating/ Ironing Machine or Combined Machine
  9. Heat Setting Plant
  10. Reactivating Plant
  11. Pre-Lasting Conditioner
  12. Twin Sole Attaching Machine
  13. Ironing & Conditioning Machine
  14. Unlasting Machine
  15. Heel Nailing Machine
  16. Stamping Machine
  17. Heel and Sole Brushing Machine
  18. Heel and Sole Buffing Machine
  19. Edge Pre-Trimming Machine
  20. Channel Closing Machine
  21. Cutsole Stiching Machine

(3)

Leather Garments

  1. Lockstich Machine
  2. Cutting Machine
  3. Leather Polishing Machine
  4. Automatic Drying Machine
  5. Button Hole Machine
  6. Hydraulic Fleshing Machine
  7. Hydraulic Rotating Staking and Edging Machine
  8. Knife Grinding/ Reblading Machine
  9. Bandknife Splitting Machine
  10. Hydraulic Setting and Sammying Machine
  11. Hydraulic Shaving Machine
  12. Automatic Spraying Machine
  13. Leather Buffing Machine
  14. Computerised Sewing Machine
  15. Compact Flushing Press

 

F. Plastic Sector

Sl.No.

Export Product

Capital Goods which can be imported

(1)

Polyester Film Biaxially

  1. C.T. & Coater
  2. Recycling System
  3. Diesel Generating Set
  4. Oil Heat Exchanger
  5. Extruder Screw
  6. CPF System
  7. Blending Hopper
  8. Granulators with Motor, Blower, Spares & Accessories
  9. Auto Flex VI-A
  10. Extrusion Unit
  11. All Metal Separater
  12. MX Proline Gauge
  13. Circulation/Transfer Pump
  14. 3 Way Polymer Valve
  15. Pearl Mill
  16. Edge Trim
  17. Thyristorised Heating Control
  18. Oil Heating Unit

(2)

PVC Cushion Vynil Flooring, Articles for packing and packing Industries of manufacture of plastics

  1. Colour Printing line and its electrical panel
  2. Wagner-Electric order Picker with Turret Head
  3. Cooling Mixers
  4. Calender Machine
  5. Automatic Winder
  6. Coating machine

 

G. Miscellaneous Sector

(a) Agricultural products:-

(1)

Rice, Cereals

Rice Polishing Machine, Grain Sorter Machine

(2)

Starch

  1. Root Washer pit Structure
  2. Inclined Root Conveyor Belt
  3. Root Chopper
  4. Root Rasper
  5. Extractor
  6. Seperator
  7. Hydrocyclone
  8. De-hydrating Centrifuge
  9. Paddle Mixing Conveyor
  10. Screw Conveyor
  11. Starch Sifting & Bagging Cabinet
  12. Cooling Blower
  13. Starch Milk Pump
  14. Starch Percentage Detector

(b) Coir Products:-

Sl.No.

Export Product

Capital Goods which can be imported

(1)

Coir Products, Jute, Sisal, Cotton, Grass & Wool items.

Forklift truck

 

 

 

 

(c) Gem and Jewellary:-

(1)

Cut & Polished Diamonds

  1. CNC Lathe
  2. Loop Grader
  3. Ball Mill
  4. Automatic Grader
  5. Sarin Machine
  6. Bruting Machine
  7. Rico Levelling Scales

(d) Others:-

(1)

Ceramic Glazed Floor & Wall Tiles

Battery

(2)

Figured & Wired Glass

  1. Cullet Scale Hopper with Cont. panel
  2. Overflow Drain out tweel
  3. Spout equipment
  4. Roll out machine complete with control panel
  5. LEHR Driving equipment complete with control panel
  6. Temperature Control Equipment complete with control panel
  7. Forced cooling equipment complete with control panel
  8. Main line conveyor
  9. Cutting equipment complete with control panel
  10. Glass unloading equipment complete with control panel

(3)

Tarpaulin

Hydrolic Looms

(4)

Fibre Glass

  1. Refractories for Fibreglass furnance (Chrome Oxide Refractories)
  2. Recuperator Hot Air Piping, Accessocies for HAP
  3. Hot air oil Burners & Acc
  4. Bushing Environment Equipment

 

 

H. SERVICE SECTOR

Sl.No.

Export Product

Capital Goods which can be imported

(1)

Maritime port service

  1. Cranes
  2. Terminal Tractors

(2)

Construction service

  1. Tower Crane
  2. Crawler/Mobile Crane
  3. Stationery Concrete Pump
  4. Skip Hoist
  5. Welding Machines
  6. Punematic Tyre Roller
  7. Tandem Roller
  8. Paver
  9. Bulldozer
  10. Winch
  11. Niton Analyser (Spectameter)

(3)

Topographic Survey in the High Way Sector and Survey Data

  1. Tribrach
  2. Camcorder Battery
  3. Wooden Telescopic Tripod
  4. PCMCIA Flash Ram Card
  5. Data transfer cable Lemo
  6. Battery charger
  7. Circular prism
  8. Reflector pole
  9. Dual Strut

(4)

Computer Software

  1. Personal Computer Pentium III
  2. Video Conferencing System
  3. IBM Think Pad
  4. Valve Mounted Actuator
  5. Immersion Temp. Sensor
  6. Excel 500 CPU Module
  7. System Software
  8. Projection Systems
  9. CD Rom Writer
  10. Photocopiers
  11. Line Matrix Printers
  12. Laser Printer
  13. Network HUB
  14. INKJET Printers
  15. Pentium Server
  16. DEC Alpha 1200

(5)

Construction of Industrial Plants & Pipe Lines. Rental and Leasing Services.

  1. Dozer
  2. Ripper
  3. Excavator
  4. Motor Grader
  5. Pipe Bending Machine
  6. Pneumatic Bending Mandrel
  7. Internal Peumatic Line Clamp
  8. Directional Boring Machine
  9. Tandem Roller
  10. Vibratory Roller
  11. PTR
  12. Rock Breaker
  13. Horizontal Boring Machine
  14. Ground Probing System
  15. Crane
  16. Welding Machine

(6)

Cellular Roaming

  1. Microwave communication Equipment

(7)

Satellite Cable T.V. distribution and reception services

  1. Satellite Stereo Receiver Panda
  2. C-Band Receiver
  3. Adj. Channel Modulator
  4. Headend Modulator
  5. Hetrodyne Signal Processor
  6. Channel Processor
  7. Splitter
  8. Channel Combiner
  9. Distribution Amplifier
  10. LNA L-Band Receiver
  11. Feeder Cable
  12. Minitruck Amplifier
  13. Equalizer
  14. Tap off
  15. Housing F Connectors
  16. Splice
  17. F Terminator
  18. Heat Shrink