RATIFIED MINUTES

 

DIRECTORATE GENERAL OF FOREIGN TRADE

(DES-II)

 

Minutes of the Meeting of ALC-II meeting No. 13/07 held on 27.06.2006. 

 

 

The Meeting No.13/2007 held on 27.06.2006 of DHI-II for the licensing year 2006-2007 under the Chairmanship of Additional Director General of Foreign Trade (MDK) to consider the applications under Duty Exemption Scheme (Chapter-4) of Foreign Trade DHI 2004-2009. The following Officers were present in the meeting:-

 

S.No

Name of the representatives &

their Designation

 

Deptt.

 

 

1.

Shri A.C.R Das, Addl. IA

MOS

 

2

Shri S.K. Jain, Addl.IA.

DIPP

3

Shri A.K. Mishra, Asst. IA

MOS

4

Shri D.C. Suri, Sr. DO

DHI

5

Shri S.N. Singh, DO

Mines

6

Shri K.K. Funda, Asst. Director

DC(SSI)

7

Smt. Amarjeet Sroha, FTDO

DGFT

 

 

 

MINUTES OF ALC-II MEETING NO.13/07  HELD ON 27.06.06.

 

DES-II (ENGG & ELECTRONICS)

 

The agenda for individual cases was taken up for discussion and the decision taken in respect of each case is enumerated below:-

 

            These minutes were ratified by the Norms Committee (ALC – II) in its meeting No. 15/07 held on 11.07.2006.
Directorate General of Foreign Trade
Ministry of Commerce & Industry, Maulana Azad Road, Udyog Bhawan New Delhi -110011
------------------------------------------------------------------------------
Para 4.7 Officewise Statement

MEETING NUMBER

:

13/81-ALC2/2006 MEETING DATE : 27.06.2006

 

1

Case No.:1/13/81-ALC2/2006

Party Name:ORIENT ABRASIVES LTD

Meet No/Date:13/81-ALC2/2006
27.06.2006

Status:Case Deferred

HQ File :01/81/050/00102/AM07/

RLA File :05/24/040/00884/AM06/

Lic.No/Date:0510182123
15.05.2006

Defer Date:22.08.2006

Decision :The Committee considered the case as per agenda. The Committee observed that the case is under consideration of MOS. It was decided to defer the case for re-listing on 22.08.2006.

 

2

Case No.:2/13/81-ALC2/2006

Party Name:KOBIAN ELECTRONICS INDIA PVT. LTD.

Meet No/Date:13/81-ALC2/2006
27.06.2006

Status:Case Deferred

HQ File :01/81/050/00115/AM07/

RLA File :03/94/040/00052/AM07/

Lic.No/Date:0310381038
19.05.2006

Defer Date:22.08.2006

Decision :The Committee considered the case as per agenda. The Committee observed that the comments called for from DIT are still awaited. The Committee decided to remind them for expediting the comments. The case stands deferred and to be re-listed on 22.08.2006.

 

3

Case No.:3/13/81-ALC2/2006

Party Name:UNI KLINGER LIMITED,

Meet No/Date:13/81-ALC2/2006
27.06.2006

Status:Transferred to Different Section

HQ File :01/81/050/00122/AM07/

RLA File :31/24/040/00050/AM07/

Lic.No/Date:3110024986
22.05.2006

Defer Date:

Decision :The Committee considered the case as per agenda. The Committee decided to transfer this case to ALC - I as the export products pertains to them.

 

4

Case No.:4/13/81-ALC2/2006

Party Name:TRANSLLOY INDIA PVT. LTD.,

Meet No/Date:13/81-ALC2/2006
27.06.2006

Status:Case Approved

HQ File :01/81/050/00123/AM07/

RLA File :03/95/040/00174/AM07/

Lic.No/Date:0310381360
23.05.2006

Defer Date:

Decision :The Committee considered the case as per agenda. In consultation with the representative of Ministry of Mines present in the meeting the Committee approved ratification of the licence issued in this case with the following modifications:-

1. The quantity of item of import at Sr. No. 1 may be reduced to 35.02 MT;
2. The quantity of item of import at Sr. No. 2 may be reduced to 1.836 MT taking clue from SION at Sr. No. C-1627 of Engineering Product.

RLA may take suitable consequential action accordingly.

 

5

Case No.:10/13/81-ALC2/2006

Party Name:THE SARASWATI INDUSTRIAL SYNDICATE LTD.

Meet No/Date:13/81-ALC2/2006
27.06.2006

Status:Case Deferred

HQ File :01/81/050/00153/AM07/

RLA File :05/24/040/00157/AM07/

Lic.No/Date:0510183280
24.05.2006

Defer Date:22.08.2006

Decision :The Committee considered the case as per agenda. The representative of DHI present in the meeting desired to have the following documents/information from the firm before a decision in the matter could be taken:-

1. Weight of each Export Product.
2. Weight of each of the imported and indigenous input, separately for each product, for the purpose of material balancing. Net weight (Gross weight minus wastage) for each imported and indigenous input in the export product may be indicated. Net weight along with details of other imported input to be used in the resultant product and sought to be imported/procured from sources other than the license, if any, may also be indicated.
3. Detailed calculation as to how the quantity of raw material proposed for import has been arrived at, including the net weight of components to be manufactured out of these imported materials, wastages claimed at each stage of manufacturing with complete justification and supported by documentary evidence/drawings etc.
4. Weight of steel, which requires imported welding material, giving break-up of
(i) Steel Plates / Sheets upto 30 mm thickness.
(ii) Steel Plates / Sheets more than 30 mm thickness and upto 70 mm thickness.
(iii) Steel Plates / Sheets more than 70 mm thickness.
(iv) Others e.g. Flanges, Pipes, Tubes, Bars / Rods, Castings / Forgings etc.
5. Gross weight of import item no. 2 and 3;
6. Thickness wise break up of quantity of Plates/Sheets;
7. ID and OD of Pipes.

A deficiency letter on the above lines may be issued to the firm. The case stands deferred and to be re-listed on 22.08.2006.

 

6

Case No.:11/13/81-ALC2/2006

Party Name:THE SARASWATI INDUSTRIAL SYNDICATE LTD.

Meet No/Date:13/81-ALC2/2006
27.06.2006

Status:Case Deferred

HQ File :01/81/050/00154/AM07/

RLA File :05/24/040/00158/AM07/

Lic.No/Date:0510183281
24.05.2006

Defer Date:22.08.2006

Decision :The Committee considered the case as per agenda. The representative of DHI present in the meeting desired to have the following documents/information from the firm before a decision in the matter could be taken:-

1. Weight of each Export Product.
2. Weight of each of the imported and indigenous input, separately for each product, for the purpose of material balancing. Net weight (Gross weight minus wastage) for each imported and indigenous input in the export product may be indicated. Net weight along with details of other imported input to be used in the resultant product and sought to be imported/procured from sources other than the license, if any, may also be indicated.
3. Detailed calculation as to how the quantity of raw material proposed for import has been arrived at, including the net weight of components to be manufactured out of these imported materials, wastages claimed at each stage of manufacturing with complete justification and supported by documentary evidence/drawings etc.
4. Weight of steel, which requires imported welding material, giving break-up of
(i) Steel Plates / Sheets upto 30 mm thickness.
(ii) Steel Plates / Sheets more than 30 mm thickness and upto 70 mm thickness.
(iii) Steel Plates / Sheets more than 70 mm thickness.
(iv) Others e.g. Flanges, Pipes, Tubes, Bars / Rods, Castings / Forgings etc.
5. Thickness wise break up of quantity of Plates/Sheets;
6. ID and OD of Pipes.

A deficiency letter on the above lines may be issued to the firm. The case stands deferred and to be re-listed on 22.08.2006.

 

7

Case No.:12/13/81-ALC2/2006

Party Name:THE SARASWATI INDUSTRIAL SYNDICATE LTD.

Meet No/Date:13/81-ALC2/2006
27.06.2006

Status:Case Deferred

HQ File :01/81/050/00155/AM07/

RLA File :05/24/040/00159/AM07/

Lic.No/Date:0510183282
24.05.2006

Defer Date:22.08.2006

Decision :The Committee considered the case as per agenda. The representative of DHI present in the meeting desired to have the following documents/information from the firm before a decision in the matter could be taken:-

1. Detail technical drawings with dimension of each export product, Catalogue, if any, may also be furnished.
2. Weight of each Export Product.
3. Weight of each of the imported and indigenous input, separately for each product, for the purpose of material balancing. Net weight (Gross weight minus wastage) for each imported and indigenous input in the export product may be indicated. Net weight along with details of other imported input to be used in the resultant product and sought to be imported/procured from sources other than the license, if any, may also be indicated.
4. Information about the inputs required per unit of the resultant product as per Sl.No.1 of Appendix-11A appearing in current HBP (Vol.I) separately for each product.
5. Detailed calculation as to how the quantity of raw material proposed for import has been arrived at, including the net weight of components to be manufactured out of these imported materials, wastages claimed at each stage of manufacturing with complete justification and supported by documentary evidence/drawings etc.

A deficiency letter on the above lines may be issued to the firm. The case stands deferred and to be re-listed on 22.08.2006.

 

8

Case No.:5/13/81-ALC2/2006

Party Name:TRAIL BLAZER (INDIA) PVT LTD

Meet No/Date:13/81-ALC2/2006
27.06.2006

Status:Transferred to Different Section

HQ File :01/81/050/00133/AM07/

RLA File :07/24/040/00099/AM07/

Lic.No/Date:0710045104
25.05.2006

Defer Date:

Decision :The Committee considered the case as per agenda. The Committee decided to transfer this case to ALC - I as the export products pertains to them.

 

9

Case No.:15/13/81-ALC2/2006

Party Name:THE SARASWATI INDUSTRIAL SYNDICATE LTD.

Meet No/Date:13/81-ALC2/2006
27.06.2006

Status:Case Deferred

HQ File :01/81/050/00167/AM07/

RLA File :05/24/040/00114/AM07/

Lic.No/Date:0510183473
26.05.2006

Defer Date:22.08.2006

Decision :The Committee considered the case as per agenda. The representative of DHI present in the meeting desired to have the following documents/information from the firm before a decision in the matter could be taken:-

1. Model number, technical specification and specific quantity-both in terms of number (if any) and/or weight, of each export product (Appendix-33 of current HBP refers).
2. Weight of each Export Product.
3. Weight of each of the imported and indigenous input, separately for each product, for the purpose of material balancing. Net weight (Gross weight minus wastage) for each imported and indigenous input in the export product may be indicated. Net weight along with details of other imported input to be used in the resultant product and sought to be imported/procured from sources other than the license, if any, may also be indicated.
4. Detailed calculation as to how the quantity of raw material proposed for import has been arrived at, including the net weight of components to be manufactured out of these imported materials, wastages claimed at each stage of manufacturing with complete justification and supported by documentary evidence/drawings etc.
5. Weight of steel, which requires imported welding material, giving break-up of
(i) Steel Plates / Sheets upto 30 mm thickness.
(ii) Steel Plates / Sheets more than 30 mm thickness and upto 70 mm thickness.
(iii) Steel Plates / Sheets more than 70 mm thickness.
(iv) Others e.g. Flanges, Pipes, Tubes, Bars / Rods, Castings / Forgings etc.
6. Gross weight of import item no. 2 ;
7. Thickness wise break up of quantity of Plates/Sheets;
8. ID, OD of Pipes.

A deficiency letter on the above lines may be issued to the firm. The case stands deferred and to be re-listed on 22.08.2006.

 

10

Case No.:6/13/81-ALC2/2006

Party Name:SUZLON ENERGY LIMITED

Meet No/Date:13/81-ALC2/2006
27.06.2006

Status:Case Deferred

HQ File :01/81/050/00138/AM07/

RLA File :31/24/040/00054/AM07/

Lic.No/Date:3110025042
26.05.2006

Defer Date:22.08.2006

Decision :The Committee considered the case as per agenda. The representative of DHI present in the meeting desired to have the following documents/information from the firm before a decision in the matter could be taken:-

1. Detail technical drawings with dimension of each export product, Catalogue, if any, may also be furnished.
2. Weight of each Export Product.
3. Weight of each of the imported and indigenous input, separately for each product, for the purpose of material balancing. Net weight (Gross weight minus wastage) for each imported and indigenous input in the export product may be indicated. Net weight along with details of other imported input to be used in the resultant product and sought to be imported/procured from sources other than the license, if any, may also be indicated.
4. Detailed calculation as to how the quantity of raw material proposed for import has been arrived at, including the net weight of components to be manufactured out of these imported materials, wastages claimed at each stage of manufacturing with complete justification and supported by documentary evidence/drawings etc.

A deficiency letter on the above lines may be issued to the firm. The case stands deferred and to be re-listed on 22.08.2006.

 

11

Case No.:7/13/81-ALC2/2006

Party Name:SUZLON ENERGY LIMITED

Meet No/Date:13/81-ALC2/2006
27.06.2006

Status:Transferred to Different Section

HQ File :01/81/050/00139/AM07/

RLA File :31/24/040/00053/AM07/

Lic.No/Date:3110025044
26.05.2006

Defer Date:

Decision :The Committee considered the case as per agenda. The Committee decided to transfer this case to ALC - I as the export products pertains to them.

 

12

Case No.:16/13/81-ALC2/2006

Party Name:THE SARASWATI INDUSTRIAL SYNDICATE LTD.

Meet No/Date:13/81-ALC2/2006
27.06.2006

Status:Case Deferred

HQ File :01/81/050/00174/AM07/

RLA File :05/24/040/00171/AM07/

Lic.No/Date:0510183730
30.05.2006

Defer Date:22.08.2006

Decision :The Committee considered the case as per agenda. The representative of DHI present in the meeting desired to have the following documents/information from the firm before a decision in the matter could be taken:-

1. Weight of each Export Product.
2. Weight of each of the imported and indigenous input, separately for each product, for the purpose of material balancing. Net weight (Gross weight minus wastage) for each imported and indigenous input in the export product may be indicated. Net weight along with details of other imported input to be used in the resultant product and sought to be imported/procured from sources other than the license, if any, may also be indicated.
3. Detailed calculation as to how the quantity of raw material proposed for import has been arrived at, including the net weight of components to be manufactured out of these imported materials, wastages claimed at each stage of manufacturing with complete justification and supported by documentary evidence/drawings etc.
4. Weight of steel, which requires imported welding material, giving break-up of
(i) Steel Plates / Sheets upto 30 mm thickness.
(ii) Steel Plates / Sheets more than 30 mm thickness and upto 70 mm thickness.
(iii) Steel Plates / Sheets more than 70 mm thickness.
(iv) Others e.g. Flanges, Pipes, Tubes, Bars / Rods, Castings / Forgings etc.
5. Gross weight of import item no. 2 and 3;
6. Thickness wise break up of quantity of Plates/Sheets;
7. ID and OD of Pipes.

A deficiency letter on the above lines may be issued to the firm. The case stands deferred and to be re-listed on 22.08.2006.

 

13

Case No.:8/13/81-ALC2/2006

Party Name:TRANTER INDIA PRIVATE LIMITED

Meet No/Date:13/81-ALC2/2006
27.06.2006

Status:Case Approved

HQ File :01/81/050/00145/AM07/

RLA File :31/24/040/00060/AM07/

Lic.No/Date:3110025090
30.05.2006

Defer Date:

Decision :The Committee considered the case as per agenda. In consultation with the representative of DIPP present in the meeting the Committee approved ratification of the licence issued in this case with the following modifications:-

1. The quantity of item of import may be reduced to 11280 Kgs. inclusive of 2% wastage.

Committee also decided to send a copy of the application of the firm to DIPP for their record.

RLA may take suitable consequential action accordingly.

 

14

Case No.:17/13/81-ALC2/2006

Party Name:POLY MEDICURE LTD.

Meet No/Date:13/81-ALC2/2006
27.06.2006

Status:Case Deferred

HQ File :01/81/050/00176/AM07/

RLA File :05/24/040/00162/AM07/

Lic.No/Date:0510183782
31.05.2006

Defer Date:22.08.2006

Decision :The Committee considered the case as per agenda. The representative of DIPP present in the meeting desired to have the following documents/information from the firm before a decision in the matter could be taken:-

1. Drawing showing placement of I.V. Flow regulator also alongwith other component;
2. Weight of bottom/top cover, lock pin and gasket and material of constructions of each of them.

A deficiency letter on the above lines may be issued to the firm. The case stands deferred and to be re-listed on 22.08.2006.

 

15

Case No.:18/13/81-ALC2/2006

Party Name:SIETZ TECHNOLOGIES INDIA PVT. LTD.

Meet No/Date:13/81-ALC2/2006
27.06.2006

Status:Transferred to Different Section

HQ File :01/81/050/00177/AM07/

RLA File :05/24/040/00180/AM07/

Lic.No/Date:0510183784
31.05.2006

Defer Date:

Decision :The Committee considered the case as per agenda. The Committee decided to transfer this case to ALC - I as the export products pertains to them.

 

16

Case No.:9/13/81-ALC2/2006

Party Name:TRANSPARENT ENERGY SYSTEMS PVT.LTD.,

Meet No/Date:13/81-ALC2/2006
27.06.2006

Status:Case Deferred

HQ File :01/81/050/00151/AM07/

RLA File :31/24/040/00056/AM07/

Lic.No/Date:3110025097
31.05.2006

Defer Date:22.08.2006

Decision :The Committee considered the case as per agenda. The representative of DIPP present in the meeting desired to have the following documents/information from the firm before a decision in the matter could be taken:-

1. Drawing showing the requirement of tubes;
2. Material of construction of tubes.

A deficiency letter on the above lines may be issued to the firm. The case stands deferred and to be re-listed on 22.08.2006.

 

17

Case No.:13/13/81-ALC2/2006

Party Name:SUZLON ENERGY LIMITED

Meet No/Date:13/81-ALC2/2006
27.06.2006

Status:Case Deferred

HQ File :01/81/050/00156/AM07/

RLA File :31/24/040/00063/AM07/

Lic.No/Date:3110025112
01.06.2006

Defer Date:22.08.2006

Decision :The Committee considered the case as per agenda. The representative of DHI present in the meeting desired to have the following documents/information from the firm before a decision in the matter could be taken:-

1. Detail technical drawings with dimension of each export product, Catalogue, if any, may also be furnished.
2. Weight of each Export Product.
3. Weight of each of the imported and indigenous input, separately for each product, for the purpose of material balancing. Net weight (Gross weight minus wastage) for each imported and indigenous input in the export product may be indicated. Net weight along with details of other imported input to be used in the resultant product and sought to be imported/procured from sources other than the license, if any, may also be indicated.
4. Detailed calculation as to how the quantity of raw material proposed for import has been arrived at, including the net weight of components to be manufactured out of these imported materials, wastages claimed at each stage of manufacturing with complete justification and supported by documentary evidence/drawings etc.

A deficiency letter on the above lines may be issued to the firm. The case stands deferred and to be re-listed on 22.08.2006.

 

18

Case No.:19/13/81-ALC2/2006

Party Name:SWAM PNEUMATICS PVT.LTD.

Meet No/Date:13/81-ALC2/2006
27.06.2006

Status:Case Approved

HQ File :01/81/050/00186/AM07/

RLA File :05/24/040/00184/AM07/

Lic.No/Date:0510183871
01.06.2006

Defer Date:

Decision :The Committee considered the case as per agenda. In consultation with the representative of DIPP present in the meeting the Committee approved ratification of the licence issued in this case in terms of General Note No. 4 of Engg Product inserted vide Public Notice No. 46 dated 6.11.2002.

RLA may take suitable consequential action accordingly.

 

19

Case No.:14/13/81-ALC2/2006

Party Name:WEBB INDIA PVT. LTD

Meet No/Date:13/81-ALC2/2006
27.06.2006

Status:Case Deferred

 

HQ File :01/81/050/00162/AM07/

RLA File :07/24/040/00136/AM07/

Lic.No/Date:0710045295
06.06.2006

Defer Date:22.08.2006

 

Decision :The Committee considered the case as per agenda. The representative of DHI present in the meeting desired to have the following documents/information from the firm before a decision in the matter could be taken:-

1. Units of import item nos. 1,4,10,24 & 25 are different from the lists of similar items appearing elsewhere in the list. Why it is so?
2. Detailed description/exact end use of import item of flat turns, G.A. of Baggage pusher assembly;
3. item nos. 22 & 27 have been stated as components while similar item at Sr. No. 23 has been stated as raw material and wastage has also been claimed. What is the exact use of this item and why wastage has been claimed. Similarly, item nos. 24 & 25 have been stated as raw material while item no. 26 has been stated as component.
4. How item no. 36 has been stated as raw material and what is the justification for claiming wastage;
5. Specifications/part nos. of item nos. 37 & 38 and also the length of item no. 37;
6. Technical specifications/drawings of the export product.

A deficiency letter on the above lines may be issued to the firm. The case stands deferred and to be re-listed on 22.08.2006.

 



 

 
 

Date:26.07.2006
Place:New Delhi

Amarjeet Sroha
Foreign Trade Development Officer

 

PART “A” FRESH

 

Case No. A-17

 M/s. Shetron Ltd., Bangalore

Meeting No. 13/07

F.No. 01/81/162/230/AM’07/DES-II

Dated 27.06.2006

 RLA’s No. 07/21/40/171/AM07

 

Lic No. 0710045278 dt. 06.06.2006

 

The Committee considered the case as per agenda. In consultation with the representative of DIPP present in the meeting the Committee approved ratification of the licence issued in this case as applied for.

 

RLA may take suitable consequential action accordingly.

 

Case No. A-18

 M/s. Pregna International Ltd.

Meeting No. 13/07

F.No. 01/85/162/128/AM’07/DES-II

Dated 27.06.2006

 RLA’s No. 03/95/40/1551/AM06

 

Lic No. 310374773 dt. 04.04.2006

 

The Committee considered the case as per agenda. The representative of DIPP present in the meeting desired to have the following documents/information from the firm before a decision in the matter could be taken:-

 

1.                  Sample of export product.

 

A deficiency letter on the above lines may be issued to the firm. The case stands deferred and to be re-listed on 22.08.2006.

 

 

PART “AR” FRESH

 

Case No. AR-25

 M/s. Paharpur Cooling Towers Ltd.

Meeting No. 13/07

F.No. 01/81/162/794/AM’06/DES-II

Dated 27.06.2006

Lic. No. 0210087977 dt. 04.04.2006

 

The Committee considered the case as per agenda. In consultation with the representative of DIPP present in the meeting the Committee approved amendment of the licence and items of import at Sr. Nos. 1 & 2 may be allowed as applied for.

 

RLA may take suitable consequential action accordingly.

 

Case No. AR-26

 M/s. Digicontrols Northern (P) Ltd.

Meeting No. 13/07

F.No. 01/80/50/548/AM’06/DES-II

Dated 27.06.2006

Lic. No. 0510162906 dt. 27.07.2005

 

The Committee considered the case as per agenda. The Committee observed that the comments called for from DOT are still awaited. The Committee decided to remind them for expediting the comments. The case stands deferred and to be re-listed on 22.08.2006.

 

 

Case No. AR-27

 M/s. Thermax Babcocks Wilcox Ltd.

Meeting No. 13/07

F.No. 01/81/50/698/AM’06/DES-II

Dated 27.06.2006

Lic. No. 3110022778 dt. 23.11.2005

 

The Committee considered the case as per agenda. The representative of DHI present in the meeting informed that the information as desired in our earlier letter has not been submitted by the firm. The Committee, therefore desired to have the following documents/information from the firm before a decision in the matter could be taken:-

 

1.                  Net weight of each imported inputs;

2.                  Wastage claimed and detailed justification for the same, for each of the imported raw materials viz. pipes, tubes, plates etc.;

3.                  Net weight of all indigenous inputs (both raw material and components) for the purpose of weight balancing;

4.                  Why tubes have also been included in the import item no. 7. Length & weight of each size of tube may be furnished and if their usages involves some wastage & justification for the same may also be furnished.

 

A deficiency letter on the above lines may be issued to the firm. The case stands deferred and to be re-listed on 22.08.2006.

           

 

Case No. AR-28

 M/s. Sona Okegawa Precision Forgings Ltd.

Meeting No. 13/07

F.No. 01/81/50/884/AM’06/DES-II

Dated 27.06.2006

Lic. No. 0510175316 dt. 27.01.2006

 

The Committee considered the case as per agenda. The representative of DHI present in the meeting informed that wastage on account of rejections are not permitted as per Policy. The Committee, therefore, decided to reject the request of the firm.

 

Case No. AR-29

 M/s. Raman Boards Ltd., Mysore

Meeting No. 13/07

F.No. 01/81/50/840/AM’06/DES-II

Dated 27.06.2006

Lic. No. 0710042608 dt. 13.01.2006

 

The Committee considered the case as per agenda. The representative of DIPP present in the meeting desired to have the following documents/information from the firm before a decision in the matter could be taken:-

 

1.                  The information/calculations are given for 118800 nos. whereas the quantity of export product is 108000 nos;

2.                  The calculation should be given for the applied export quantity.

 

A deficiency letter on the above lines may be issued to the firm. The case stands deferred and to be re-listed on 22.08.2006.

 

 

 

 

 

 

 

Case No. AR-30

 M/s. Spack Automotives Ltd., N. Delhi

Meeting No. 13/07

F.No. 01/81/50/775/AM’06/DES-II

Dated 27.06.2006

Lic. No. 0510172168 dt. 16.12.2005

 

The Committee considered the case as per agenda. In consultation with the representative of DIPP present in the meeting the Committee approved ratification of the licence issued in this case with the following modifications:-

 

1.                  The words “having net content of RTP 200TFE as 350 Kgs.” may be added in the export product;

2.                  The quantity of item of import at Sr. No. 1 may be reduced to 14000 nos. on net to net basis with accountability clause;

3.                  The item of import at Sr. No. 2 may be allowed as applied for;

4.                  The quantity of item of import at Sr. No. 3 may be reduced to 367.50 Kg. inclusive of 5% wastage.

 

RLA may take suitable consequential action accordingly.

 

 

Case No. AR-31

 M/s. Phoenix Lamps Ltd.

Meeting No. 13/07

F.No. 01/81/50/748/AM’06/DES-II

Dated 27.06.2006

Lic. No. 0510171542 dt. 09.12.2005

 

The Committee considered the case as per agenda. The representative of DIPP present in the meeting informed that the reply furnished by the firm is incomplete and the documents as stated in letter dated 10.05.2006 have not been furnished. The Committee decided to call for the same from the firm before a decision in the matter could be taken.

 

A deficiency letter on the above lines may be issued to the firm. The case stands deferred and to be re-listed on 22.08.2006.

 

 

PART “B” FRESH

 

Case No. B-17

 M/s. Steel Authority of India Ltd.

Meeting No. 13/07

F.No. 01/81/162/206/AM’07/DES-II

Dated 27.06.2006

DEPB Lic no. 0510113477 dt. 01.01.2004

 

The Committee considered the case as per agenda. The Committee observed that the request of the firm for revalidation of subject DEPB licence is not covered under Public Notice No. 2 dated 20.04.2005. Therefore, the Committee decided to reject the request of the firm for revalidation of the subject DEPB licence.

 

 

 

 

 

 

PART “C” FRESH

 

Case No. C-10

 M/s. Steel Authority of India Ltd.

Meeting No. 13/07

F.No. 01/81/162/235/AM’07/DES-II

Dated 27.06.2006

 

 

The Committee considered the case as per agenda. On the basis of written recommendations of MOS the Committee decided as follows:-

 

1.                  As regards clarification in respect of import item clarification may be given that Converter Refractory Bricks are essentially shaped Refractory Bricks and are, therefore, covered under item of import at Sl. No. (t) of the SION C-512 under description ‘Refractory Bricks/Shapes’;

2.                  As regards correction of import item no. (u) of SION C-512 there is a typographical error whereby one of the items is mentioned as ‘Gumming Mass’. The correct description is ‘Gunning Mass.

 

Action may be taken for necessary amendment in the SION in respect of point no. 2 above.

 

Case No. C-11

 Board of Approval

(M/s. Toyota Kirloskar Auto Parts Pvt. Ltd.)

Meeting No. 13/07

F.No. 01/81/162/207/AM’07/DES-II

Dated 27.06.2006

 

 

The Committee considered the case as per agenda. The Committee decided to defer the case and to be re-listed on 22.08.2006. The Committee further decided to remind Deptt. of Commerce (EOU Cell) for expediting the reply.

 

Case No. C-12

 M/s. Rapsri Engineering Industries Ltd., 

Meeting No. 13/07

F.No. 01/81/162/908/AM’06/DES-II

Dated 27.06.2006

 

 

The Committee considered the case as per agenda. The representative of DIPP present in the meeting informed that this firm is the only exporter for this product. Further, under SION at Sr. No. C-1985 no DEPB is fixed on the basis of this SION. Therefore, the Committee decided to delete the SION at Sr. No. C-1985 of Engineering product.

 

Case No. C-13

 Board of Approval

(M/s. Roots Industries, Coimbatore.)

Meeting No. 13/07

F.No. 01/81/162/208 /AM’07/DES-II

Dated 27.06.2006

 

 

The Committee considered the case as per agenda. The Committee decided to defer the case and to be re-listed on 22.08.2006.